Every household can't do without water heater. Installing a water heater often takes several years for the whole family. With the gradual cooling of the climate, the requirements for hot water in the bath at home are higher. However, there are not many users who really understand the water heater. The water heater that has to work every day should also be conscientiously maintained. Today, I will introduce the use and maintenance methods of electric water heater for you and your family This winter is healthier.
Maintenance of electric water heater
1. Close the power supply
As for the users who often do not turn off the power supply, they should check the water heater and send it to the repair point for repair in time if there is any abnormal situation. They advocate to replace the temperature controller and heater at the designated repair point every three years.
2. Tank cleaning
Any electrical appliance will have dirt after a long time of use. The same is true for water heaters. The tank should be cleaned once every six months. The cleaning method is to first block the power supply, close the inlet valve, and then open the outlet valve. Turn the drain switch on the safety valve 90 degrees anticlockwise to naturally drain the water and sediment in the water heater, and then clean it with tap water. After cleaning, return the drain switch to its original position. Pay attention to the power supply after the water is full. 3. Clean up the sundries
After the water heater has been used for a period of time, we will find that the water output of the shower is reduced, which means that there are already sundries blocking the water outlet. At this time, we should timely clean up the debris to ensure that the outlet is unobstructed, which is helpful to extend the service life of the water heater.
Source: Jiangmen magnetic energy water heater http://www.konryt.com/
What causes the trip of Jiangmen storage type magnetic energy electric water heater
The sudden trip of electric water heater during heating is mainly due to the following reasons: firstly, the heating pipe and temperature sensitive switch probe conduct heat directly through the metal. If the heat conduction is too fast or too high, it will cause problems. At this point, it may be necessary to replace it. Secondly, the insulation function of the heating tube is reduced, so its insulation resistance is unstable. When the leakage current exceeds a certain value, it will act on the
How to clean Jiangmen magnetic energy water heater
Many people's water heaters have been used for a long time, and the water heaters have become very dirty, especially in the places we can't see inside. The reason is that a lot of scale has been accumulated in the water heater since it was used, and there is no active design to clean the scale. Therefore, we need to clean the water heater regularly. If you can't clean the water heater, let it Let me teach you. The first step is to cut off the power supply of the water heater, then close the two
Jiangmen magnetic energy water heater tells you the reason why the water heater runs slowly
Water heater hot water is not much, slow to boil water? The common electric water heater will appear this kind of shortcoming after using for as long as one or two years. The water is often not hot after half a day's operation, or the hot water will be gone before the bath is finished. Can you clearly buy a large number of liters of water heater? What is the problem? In fact, this is mostly due to the problem caused by the scale inside the electric water heater. After a long time of using the ke
The technique of removing the stain of Jiangmen magnetic energy water heater
As we all know, after a long time of use, all electric appliances that use electric heating tubes to heat water, such as electric water heaters, electric kettle, etc., simply produce scale and dirt on the surface of the electric heating tubes, and then reduce the heat exchange efficiency. If you can't take it out in time, it will not only waste the electric energy, but also shorten the life of the heating pipe due to poor heat conduction of the heating pipe, and even damage it due to overheating